From the Paris, TX shop

How to lower blinds without strings

Light wood horizontal blinds that lift from the bottom rail instead of a pull cord

Cordless blinds removed the loop that hung in a child’s reach, and they replaced it with a motion nobody explained. The bottom rail is the handle. There is no string to hunt for, which is the point, and also why people stand at the window pulling the slats themselves.

Lower them without a fight

Stand in front of the middle of the blind. Take the bottom rail with one or both hands, centered, and draw it down at an even speed. If only the left side comes, you are pulling off-center. Stop, level the rail, and start again. On some rails you squeeze a button underneath or press in on the end caps to release the lock. Look before you yank.

If the blind drops an inch and catches, something is in the way: a sill full of pictures, a crank handle, a slat that has slipped out of the ladder tape. Clear the sill. Reseat a loose slat only if it slides back without force. Then try once more, slowly.

Bring them back up

Guide the rail upward. Let the slats fold. Do not shove so fast that the blind jumps the bracket. A blind that will lower and will not rise usually has a tired spring or a wand mechanism that has slipped. That is a repair, not a technique problem. Our notes on broken blind strings cover the older corded style, which is a different animal. Cordless failures are usually the clutch, and we would rather replace a clutch than watch someone reef on the rail until the mounting screws pull out of the drywall.

If we measured the blind, call (903) 784-7089 and we will sort it out. If the blind was a stock width cut with kitchen scissors, the cure may be a new blind made to the opening.

Questions people ask before they book

How do I lower cordless blinds?

Hold the bottom rail in the center. Pull down slowly and evenly. If the blind has a push-button or a squeeze on the rail, use that release first. Do not pull one side harder than the other. A cocked rail is how slats pop out of the ladder.

How do I raise them again?

Push the bottom rail up smoothly and let the slats collect. If it stops halfway, guide it the rest of the way without jerking. Some cordless blinds want a slight downward tug to wake the spring before they will travel up. The product sheet that came with the blind is the authority if it disagrees with a generic video.

What if the blind will not move?

Check for a locked rail, a slat jammed in the bracket, or an object on the sill. If the spring feels dead, stop. Forcing a cordless mechanism strips it. Call us if we installed it. If it came from a kit, a replacement measured to the opening is often the faster repair.

Keep reading

Get a free in-home estimate

Call (903) 784-7089 or request a consultation. We measure in your home across Northeast Texas and Southeastern Oklahoma, then install with care.

Call (903) 784-7089 Free estimate