From the Paris, TX shop
Outside mount blinds for shallow or crooked frames
Inside mount is the look people ask for first. It is also the look that fails in half the older houses we measure between Paris and Bonham. The jamb is too shallow, or the sash is proud of the stop, or the opening is a quarter-inch wider at the bottom than at the top.
When outside mount is the better choice
Choose outside mount when:
- The depth from the front of the trim to the glass is too small for the headrail.
- The window is out of square and an inside blind would show a wedge of light.
- You want to hide stained or damaged trim.
- A crank handle or a burglar bar would hit an inside-mount slat.
- The window is small and covering the frame makes the proportion better.
Choose inside mount when the jamb is deep and square and you want the trim to stay visible. Newer houses in Greenville and Sherman often can. Cottages in Wolfe City often cannot. We measure depth with the hardware in mind, not with a rule of thumb from a different blind.
Light lines and stack
An outside mount that is too narrow is worse than a careful inside mount. Light leaks down the sides and the blind looks temporary. Overlap fixes that. The blind will also stack above the glass when it is raised, so we check that the stack does not cover a transom you wanted left open, and that it clears the ceiling or the soffit.
Custom blinds from our Paris shop are ordered for the mount we recommend. If you already bought a blind for the glass size, it is probably the wrong size for an outside mount. Call (903) 784-7089 before you drill the brackets that came in the box.
Questions people ask before they book
What is an outside mount blind?
The brackets go on the wall or on the face of the trim, and the blind overlaps the opening. An inside mount sits inside the jamb. Outside mount is the right call when the frame is shallow, out of square, or you want the window to look larger.
How much overlap do outside mount blinds need?
Enough that light does not halo the slats. A typical overlap is about an inch and a half to two inches past the opening on each side, more if the blind has to clear a crank or a tile edge. We mark it at the house instead of using one number for every window.
Will an outside mount look bulky?
It sits proud of the wall, so a valance or a headrail that matches the slat keeps it from looking like hardware stuck on. On a window that is already framed with thick trim, outside mount often looks more intentional than a blind rattling inside a crooked jamb.
Keep reading
Get a free in-home estimate
Call (903) 784-7089 or request a consultation. We measure in your home across Northeast Texas and Southeastern Oklahoma, then install with care.